Kenneth Michael Guitars LLC
Making a Bridge mask
I use a piece of ¼” tempered glass to
make my bridge masks. Lay down few
layers of premium 3M masking tape
with all the over laps in the same
direction
make my bridge masks. Lay down few
layers of premium 3M masking tape
with all the over laps in the same
direction
Trace the outline of the bridge
Use a razor or Exacto knife to cut the
mask out staying slightly inside the
outline. We want the mask to be a tiny
bit smaller than the bridge.
mask out staying slightly inside the
outline. We want the mask to be a tiny
bit smaller than the bridge.
Double check to make sure the mask
is completely hidden by the bridge.
When pulling the mask off the glass lift
it under the first layer of tape that was
placed on the glass. Otherwise you will
pull the mask apart and get the layers
out of position.
is completely hidden by the bridge.
When pulling the mask off the glass lift
it under the first layer of tape that was
placed on the glass. Otherwise you will
pull the mask apart and get the layers
out of position.